NOTE: You are responsible for reading the entirety of the full version of the instructions before using the unit. Heating sources can be dangerous, and only responsible persons should consider automating them.


1. Turn your range's knob and the Automasher's temperature dial to their lowest settings.
If you are using gas, ignite the flame first.

2. Remove the knob from your range as well as an adjacent one.

3. Attach the shaft coupling to the now exposed spindle.
Ensure that the coupling set screw fits into the groove on the spindle.



4. Align the Automasher such that it fits into the shaft coupling and such that the adjacent
spindle fits between the leverage arms.



5. Attach the Automasher to the spindle and activate

For overall all-grain brewing instructions, click here.



NOTE: Use on outdoor burners without a temperature control require the installation
and use of a bronze globe valve between the burner and regulator.

Visit Cole-Parmer's Site to find a suitable one for a few dollars.
Their EW-98675-03 is a good example for scenarios utilizing less than 200 PSI.
Read the detailed instructions for more information on this.


Copyright 2005, Autolich LLC